4 en | Table of contents PRAESENSA
2019.11 | V1.00 | Installation manual Bosch Security Systems B.V.
5.5 Heat loss calculation 45
6
From installation to configuration 47
6.1 MAC-addresses and hostname 47
6.2 Connecting the system controller 48
6.3 Network connections to devices 49
6.3.1 Star topology 49
6.3.2 Tree topology 49
6.3.3 Ring topology 49
6.3.4 Hop count 50
6.4 Device status and reset 51
7
System controller | PRA-SCL/SCM/SCS 53
7.1 Introduction 53
7.2 Functions 53
7.3 Functional diagram 54
7.4 System controller variants 55
7.5 Indicators and connections 56
7.6 Installation 56
7.6.1 Parts included 56
7.6.2 Memory card 57
7.6.3 Power supply 58
7.6.4 Ethernet network 59
7.6.5 Internal battery 60
7.6.6 Reset to factory default 60
7.7 Approvals 61
7.8 Technical data 61
8
*Amplifier, 600W 4-channel | PRA-AD604 64
8.1 Introduction 64
8.2 Functions 64
8.3 Functional diagram 66
8.4 Indicators and connections 67
8.5 Installation 68
8.5.1 Parts included 68
8.5.2 Safety ground 69
8.5.3 Power supply 70
8.5.4 Lifeline 71
8.5.5 Amplifier outputs 72
8.5.6 Ethernet network 77
8.5.7 Reset to factory default 77
8.6 Approvals 78
8.7 Technical data 78
9
Amplifier, 600W 8-channel | PRA-AD608 82
9.1 Introduction 82
9.2 Functions 82
9.3 Functional diagram 83
9.4 Indicators and connections 84
9.5 Installation 85
9.5.1 Parts included 85
9.5.2 Safety ground 86
9.5.3 Power supply 86
To Next Page
Loading...
Need help?
General
