Bosch PRAESENSA - System Options

136 en | Programming options PRAESENSA
2021.12.21 | V0.15b | F.01U.402.882
Underwriters Laboratories Listing Document (ULLD)
Bosch Security Systems B.V.
6.4.4 System options
On the System options pages, a number of general, system wide settings can be configured,
such as:
– Recorded messages
– System settings
– Time settings
– Network supervision
Topic
Configure /
programming
Feature or option Permitted
in UL2572
(Y/N/
required)
Possible settings Value Settings
permitted in
UL2572
System options
(Configuring of
system wide
settings.)
Recorded
messages
Yes Wav files uploaded with
required audio
.WAV Wav files
containing
messages
and tones
complying to
UL2572
System settings
General Yes Rapid Spanning Tree
Protocol (RSTP)
Enable/disable Set to enable
Yes Call station operator
language
Selection of
language
Set to
English
(UL2572)
Yes UL amplifier mode Enable / Disable Set to enable
Emergency mode Yes Disable calls below
priority level
Selection (prio.
0‑224)
Set to 224
Backup power
mode
Yes Disable calls below
priority level
Selection (prio.
0‑255)
Ancillary
function
Yes Report mains supply fault Enable/disable Set to enable
AC power supply
trouble
Yes Grace time to report
mains fault on control
outputs
Selection: Off /
1h‑8h
1h‑8h
Alarm sounder Yes Reactivate silenced
trouble and emergency
alarm sounder
Selection: Off /
1h‑24h
1h‑24h
Configuration
software
Yes Automatic logout after
inactivity of
Selection (5‑30min.) Set to
30min.
Time settings Yes Set time automatically
(NTP)
Enable/disable Set to
disable
Network
supervision
Yes Network supervision Enable/disable Set to enable
and make a
snapshot