Guide to instructions
Logamatic EMS – 6 720 801 387 (2011/05)
4
Guide to instructions
These installation and maintenance instructions contain all the information about the functions and
settings of the Logamatic RC35 programming unit.
Introduction to the service menu
Chapter 4.2 explains in detail the steps needed for programming all the settings in the service menu.
Operation is only briefly dealt with in the following sections.
Display texts
Words appearing on the display are shown in bold in the text.
Example: USER MENU
standard display
operation modes
switching programme
sum./win. threshold
USER MENU
To Next Page
Loading...
