Logamatic EMS – 6 720 801 387 (2011/05)
9
Product information
2
2.5 Validity of these instructions for function modules (accessories)
These instructions also apply to the programming unit when used in conjunction with the MM10
mixer module and the WM10 low loss header module.
Additional setting options may be found in some menus, if your heating system is equipped with
alternative function modules (e.g. solar module SM10). These setting options are explained in a
separate manual.
2.6 Accessories
For detailed information regarding suitable accessories, see the catalogue.
• Mixer module MM10
1)
for triggering a 3 way valve is not possible. A description of the MM10 is
included in the RC35 instructions.
• Switching moduleWM10
1)
for operation of a hydraulic low loss header
• Solar module and further EMS modules (e.g connection module ASM10)
1)
• Hybrid module HM10 for combined operation of the boiler with an air heating pump external unit.
• Remote programmer
1)
(e.g. RC2x,RC20/RF) for triggering one heating circuit at a time
• External temperature sensor
2)
, external room temperature sensor
1) With heating boilers with UBA1.x or DBA the use of modules
2) Required with weather compensated control.
To Next Page
Loading...
