● Immediately clean up any spilled liquids from the floor due to the risk of falling!
1.2 Appropriate Use
This product may only be used for the applications mentioned in the reference docu‐
mentations (see index entry "Reference documentations") and under the described ap‐
plication, ambient and operating conditions.
This product is exclusively intended for use in machines and systems in an industrial
environment. This is to be understood as applications according to IEC 60204-1 "Safety
of machinery, Electric equipment of machines" and NFPA 79 "Electrical Standard for In‐
dustrial Machinery".
According to IEC 61800-3:
● Frequency converters Fe and Fv with external filters are products of
category C3, which are not provided for use in a public low-voltage
mains supplying residential areas.
● If these components are used in such a mains, high-frequency interfer‐
ence is to be expected. This can require additional measures of radio
interference suppression.
2 Identification
2.1 Type Code
The figures illustrate the basic structure of the type code. Our sales repre‐
sentative will help you with the current status of available versions.
DOK-RCON01-REX*F*UL***-IN01-EN-P
Rexroth Frequency Converters
Bosch Rexroth AG
Identification
25/65
To Next Page
Loading...
