9 Environmental Protection and Disposal
9.1 Environmental Protection
Production Processes
The products are made with energy- and resource-optimized production processes
which allow re-using and recycling the resulting waste. We regularly try to replace pollu‐
tant-loaded raw materials and supplies by more environment-friendly alternatives.
No Release of Hazardous Substances
Our products do not contain any hazardous substances which may be released in the
case of appropriate use. Normally, our products will not have any negativ influences on
the environment.
Significant Components
Basically, our products contain the following components:
Electronic devices Motors
∙ steel ∙ steel
∙ aluminum ∙ aluminum
∙ copper ∙ copper
∙ synthetic materials ∙ brass
∙ electronic components and modules ∙ magnetic materials
∙ electronic components and modules
9.2 Disposal
Return of Products
Our products can be returned to our premises free of charge for disposal. It is a precon‐
dition, however, that the products are free of oil, grease or other dirt.
Furthermore, the products returned for disposal must not contain any undue foreign
material or foreign components.
Send the products ”free domicile” to the following address:
Bosch Rexroth AG
Electric Drives and Controls
Buergermeister-Dr.-Nebel-Strasse 2
97816 Lohr am Main, Germany
Packaging
The packaging materials consist of cardboard, wood and polystyrene. These materials
can be recycled anywhere without any problem.
For ecological reasons, please refrain from returning the empty packages to us.
DOK-RCON01-REX*F*UL***-IN01-EN-P
Rexroth Frequency Converters
Bosch Rexroth AG
Environmental Protection and Disposal
63/65
To Next Page
Loading...
