5.3.5 Terminal Block
Fe Main circuit terminals description
Terminal Description
L1, L2, L3 Mains power supply inputs
U, V, W Frequency converter outputs (to be connected to the motor)
PB
Reserved terminal for external braking resistor (applicable to 0.75 kW to
15 kW frequency converters)
P1, (+) DC positive bus outputs
(-) DC negative bus output
Grounding
Fig.5-2: Fe_Main circuit terminals description
Fe Main circuit terminals figure
Applicable to 0.75 to 7.5 kW:
Fig.5-7: Main circuit terminals_0.75 to 7.5 kW_Top
Fig.5-8: Main circuit terminals_0.75 to 7.5 kW_Bottom
Applicable to 11 to 15 kW:
Fig.5-9: Main circuit terminals_11 to 15 kW
DOK-RCON01-REX*F*UL***-IN01-EN-P
Rexroth Frequency Converters
Bosch Rexroth AG
Instructions for Use
51/65
To Next Page
Loading...
