Applicable to 18.5 to 37 kW:
Fig.5-10: Main circuit terminals_18.5 to 37 kW
Applicable to 45 to 90 kW:
Fig.5-11: Main circuit terminals_45 to 90 kW
Applicable to 110 kW:
Fig.5-12: Main circuit terminals_110 kW
Applicable to 132 to 160 kW:
Fig.5-13: Main circuit terminals_132 to 160 kW
1. For 11 kW to 160 kW frequency converters, the main circuit termi‐
nals are on the bottom of the frequency converter.
2. For 45 kW to 160 kW frequency converters, UL marked connectors
and cables should be used for wiring of the terminal blocks. The con‐
nectors may be of crimp, ring or fork types or other similar types.
3. There are two grounding connections, one for the input side, the oth‐
er for the output side.
Bosch Rexroth AG
Instructions for Use
DOK-RCON01-REX*F*UL***-IN01-EN-P
Rexroth Frequency Converters
52/65
To Next Page
Loading...
