2.11 Protection During Handling and Mounting
In unfavorable conditions, handling and assembling certain parts and components in an
improper way can cause injuries.
Risk of injury by improper handling! Risk of bodily
injury by bruising, shearing, cutting, hitting, or im‐
proper handling of pressurized lines!
● Observe the general construction and safety regulations on handling and assembly.
● Use suitable devices for assembly and transport.
● Avoid jamming and bruising by appropriate measures.
● Always use suitable tools. Use specific tools in different circumstances.
● Use lifting equipment and tools in the correct manner.
● If necessary, use suitable protective devices (for example safety goggles, safety
shoes, safety gloves).
● Do not stand under hanging loads.
● Immediately clean up any spilled liquids because of the danger of skidding.
Bosch Rexroth AG
Safety Instructions for Electric Drives and Controls
DOK-RCON03-EFC-3600***-IT01-EN-P
Rexroth Frequency Converter EFC 3600
18/235
To Next Page
Loading...
