Bosch Rexroth EFC 3600 - Main Circuit Terminals; Main Circuit Terminals Description

5.7 Main Circuit Terminals
Fig.5-8: Main circuit terminals (1x200 VAC)
Fig.5-9: Main circuit terminals (3x400 VAC)
5.8 Main Circuit Terminals Description
Terminal Description
1-phase 200 VAC class
L1, L2 Mains power supply inputs
U, V, W Frequency converter outputs (to be connected to the motor)
B Reserved terminal for external brake resistor
(+) DC positive bus output
Grounding and input PE
3-phase 400 VAC class
L1, L2, L3 Mains power supply inputs
U, V, W Frequency converter outputs (to be connected to the motor)
B Reserved terminal for external brake resistor
(+) DC positive bus output
Grounding and input PE
Fig.5-2: Main circuit terminals description
●
Do not use terminal L3 for 1P 200 VAC class models!
● Input PE terminals: located at bottom left of the heat sink .
● Grounding terminals: located at bottom right of the heat sink
.
DOK-RCON03-EFC-3600***-IT01-EN-P
Rexroth Frequency Converter EFC 3600
Bosch Rexroth AG
Mounting and Installation
33/235