Bosch Rexroth EFC 3600 - Group S0: V;F Control

8.3 Group S0: V/F control
S0.00 V/F control mode
Setting range 0 ~ 2
Minimum unit 1
Factory default 0
● 0: Linear curve
This mode refers to linear voltage / frequency control, which is suitable for normal
constant torque loads as shown in the figure below.
Fig.8-9: Linear curve
● 1: Square curve
This mode refers to square voltage / frequency control, which is suitable for variable
torque loads of fans, pumps, etc.
DOK-RCON03-EFC-3600***-IT01-EN-P
Rexroth Frequency Converter EFC 3600
Bosch Rexroth AG
Parameter Settings
73/235