Fig.8-12: [S0.05] "V/F frequency 3" above [S2.00] "motor rated frequency"
Fig.8-13: [S0.05] "V/F frequency 3" below [S2.00] "motor rated frequency"
In this case, the output voltage is limited to 100 % even if [S0.06] "V/F voltage 3" is
above 100 %.
S0.07~S0.19
Reserved
S0.20 Rated motor slip frequency
Setting range 0.00 ~ 20.00 Hz
Minimum unit 0.01 Hz
Factory default 0.00 Hz
Bosch Rexroth AG
Parameter Settings
DOK-RCON03-EFC-3600***-IT01-EN-P
Rexroth Frequency Converter EFC 3600
76/235
To Next Page
Loading...
