Bosch Rexroth EFC 3600 - Page 96

8 multi-speeds are available with the combinations of the 3 terminals.
Fig.8-30: Given by multi-speed
X3
X2 X1 Command frequency
Corresponding frequency
and Acc. / Dec. time parameter
OFF OFF OFF Multi-speed frequency 0 [b1.04], [E2.35]
OFF OFF ON Multi-speed frequency 1 [E2.10], [E2.37]
OFF ON OFF Multi-speed frequency 2 [E2.11], [E2.39]
OFF ON ON Multi-speed frequency 3 [E2.12], [E2.41]
ON OFF OFF Multi-speed frequency 4 [E2.13], [E2.43]
ON OFF ON Multi-speed frequency 5 [E2.14], [E2.45]
ON ON OFF Multi-speed frequency 6 [E2.15], [E2.47]
ON ON ON Multi-speed frequency 7 [E2.16], [E2.49]
Fig.8-2: Multi-speed terminal settings
● 4: Reserved
● 5: Acceleration / deceleration time terminal 1
● 6: Acceleration / deceleration time terminal 2
4 options of acceleration / deceleration time are available with the combinations of the
2 terminals, as shown in the table below.
Bosch Rexroth AG
Parameter Settings
DOK-RCON03-EFC-3600***-IT01-EN-P
Rexroth Frequency Converter EFC 3600
94/235