Bosche EWI - Page 69

Page 65
BOSCHE Weighing Systems
Version 4.0
2024-03-27
5 | Function menu (advanced functions) Weighing Terminal EWI / MWI
Selection of the attached printer or device
The indicator transmits the data to different peripheral devices. The peripheral
devices must be addressed with specific data formats to interpret or print the
received data (from the display) correctly.
The following peripherals can be selected (see also overview of function menu
OUTP1 on the previous page).
Note
The transferred protocols are described only briefly. For further
information on communication and design of data format, refer to
the communication protocol for the indicator. The protocol must be
ordered separately and is not part of this manual).
PC
PC: Data transmitted to computer
Data format:
CHN:A;RAW:+0; ;US;GS;GRO:+100.0;NET:+ 0.0;
TAR:+0.0;UW:+0;CNT:+0;<CR><LF>
PRINT1
Print 1: Data transmitted to printer favourite
Data format:
Date:01.04.22<CR><LF>
Time:14:28:05<CR><LF>
Gross:11.5 Kg<CR><LF>
Net:11.5 Kg<CR><LF>
Tara: 0.0 Kg<CR><LF>
<CR><LF>
<CR><LF>
<CR><LF>
<CR><LF>
<CR><LF>
<CR><LF>
<CR><LF>
PRINT2
Print 2: Data transmitted to printer HPP- 250
Data format:
<ESC>_@<ESC>_{1<ESC>_R<STX>_<ESC>_32<LF>
<ESC>_ <STX>_<ESC>_!1Tare: 0.0 Kg<CR><LF>
Net:0.0 Kg<CR><LF>
Gross:0.5 Kg<CR><LF>
Time:14.29:27<CR><LF>
Date:01.04.22<CR><LF>
<CR><LF>
<CR><LF>
<CR><LF>