A-4 BBP
®
85 Label Printer
User’s Manual
•
Reverse Print
: Attribute applied to an object where the foreground and
background colors are switched.
•
Rotate
: Turning the label data some number of degrees on the label (the printer
supports 90, 180, 270 degree rotation only).
•
Screen
: A unit of software content to show on the display (could also be called a
page or a window). Not the physical display itself.
•
Sequence/Serialization/Serial
: Generating a series of alpha or numeric
characters for subsequent labels. Also called variable data.
•
Sizing Handles
: Small arrows that appear at the corner (proportional sizing) and
sides (non-proportional sizing) of an object.
•
Supply
: Includes ribbon and media or both.
•
Template
: Label with predefined content areas or data placeholders.
•
Undo
:Restores the last editing operation. For example, if a segment of text was
deleted or changed, performing an undo will restore the original text.
•
USB Device
(Universal Serial Bus): A plug-and-play interface between a printer
and other devices. A USB device can be a Type B cable that connects to the printer
or a small, portable storage device such as a flash drive
[1]
.
•
Vertical Offset
: Shifts the image (printed portion of the label) up or down.
•
Vertical Text
: Text characters oriented one above the next, so subsequent
characters appear below preceding characters.
•
Wizard
: Series of prompts guiding user through specific action(s).
To Next Page
Loading...
