Brady BBP 85 - Open, Save or Delete an RTK Label

C-32 BBP
®
85 Label Printer User’s Manual
Right to Know (RTK)
Open, Save or Delete an RTK Label
Open, Save or Delete an RTK Label
You can only save, open or delete RTK labels from the Right To Know (RTK)
application.
To open an existing RTK label:
1. From the Home page, select Right To Know .
- or -
Select More Label Types, then select Right To Know.
2. From the Right To Know control panel, select Open Saved File .
3. In the Open File dialog, choose a category.
4. Select a label. The file immediately opens in the Editor.
To save an RTK label:
Note: This procedure assumes that an RTK label has already been created. To
create an RTK label, see “Create RTK Labels” on page C-31.
1. With the RTK label displayed in the Editor, select Menu.
2. Select Save File .
3. Select a category, or if desired, create a new category.
4. In the File name field, enter a file name for the RTK label.
5. Select OK . The RTK label is saved.
To delete an RTK label:
1. In the Right To Know control panel, select Menu.
2. Select Delete File .
3. In the Delete File dialog, choose the category where the label is located.
4. Touch the label you want to delete.
5. When prompted to delete the file, select Yes. Selecting No will cancel the
operation.