ENGLISH 10 / 78 CAP. 5 - INSTALLATION
• MULTIGAS 8500 application software (execute download and unzip)
The version number is only indicative; refer to the one indicated on the
website
The equipment programming procedure includes the following steps:
• double click on the .cli software icon
• press the “Program (F3)” button then switch on the equipment
5.1.5.2 Programming through ACU device
With the ACU device (contained in the CLIMA SOLUTION product) it is possible to update
the CLIMA machines software without a serial cable. By following the instructions contained
in the CLIMA SOLUTION product, install the CLIMA SOLUTION program on a Windows PC
connected to the internet.
If on the website www.brainbee.com a new version is available, this will be transferred to the
PC automatically.
Connect ACU to the PC to transfer the new version of the software onto the ACU mobile
device.
To update the clima station, connect the ACU to the serial port, and switch on the equipment
again, it will be updated to the latest version.
5.1.6 Registration
To start the warranty period and to activate the automatic cycles it is necessary to carry out
REGISTRATION, which implies:
• access to the distributor reserved area on the website www.brainbee.com
• selecting the icon “ACTIVATION AND MANAGEMENT OF DEVICES”
• selecting the icon “ACTIVATE/UPDATE DEVICE”
• entry of the equipment serial number
• waiting for the activation code which will have to be entered into the equipment.
See pictures below.
To Next Page
Loading...
Need help?
General
