BrainBee multigas 8500 - CAP. 10 - EQUIPMENT AND SIMULATORS; Required Equipment and Software

78 pages

Save Page as PDF

To Next Page

To Previous Page

ENGLISH 49 / 78 CAP. 10 - EQUIPMENT AND SIMULATORS

MULTIGAS 85

CAP. 10 - EQUIPMENT AND SIMULATORS

The following equipment is required

• CLIMA GAS R-1234YF / R-134A SERVICE KIT FOR STATIONS WITH GAS R134A AND

R1234YF

• ACU - AUTOMATIC CLIMA UPDATER

Software (available on the website http://www.brainbee.it), reserved area

• Clima Update Software

• Multigas 8500 Software

Main Page

Table of Contents2
Cap. 1 - Contents2
Cap. 2 - Introduction4
General Information4
Summary4
Cap. 3 - Safety Conditions5
Important Safety Information5
Environmental Precautions5
Cap. 4 - Layout and Use of the Manual6
Use of the Manual6
Symbols6
- Safety6
- Marking6
Cap. 5 - Installation7
Equipment Installation7
- Unpacking MULTIGAS 85008
- Scale Unlocking8
- Connections9
- Contrast and Language Setting9
- Programming9
- 5.1.5.1 Programming through Serial Cable9
- 5.1.5.2 Programming through ACU Device10
- Registration10
- EC Declaration of Conformity and Use and Maintenance Manual12
- First Tank Filling (Including Weight and Pressure Check)12
- First Tank Filling13
- Containers Filling13
- 5.1.9.1 New Oil Container Filling13
- 5.1.9.2 Tracer Container Filling14
- Optional Accessories Presentation15
- Setting Working Parameters and Garage Data16
Cap. 6 - Maintenance18
Equipment Maintenance18
Long Life Pump" Special Function - Vacuum Pump Oil Change18
- Vacuum Pump Oil Specifications19
Dryer Filter Change20
Wear Check of the Red and Blue Charge Hoses and the Hp Red and Lp Blue Quick Couplers22
- Eco Lock® Quick Couplers22
Refrigerant Gas Scale Check with Sample Weight and Calibration, if Needed, (Service Kit)23
New Oil Scale Check with Sample Weight and Calibration, if Needed, (Service Kit)23
Exhausted Oil Scale Check with Sample Weight and Calibration, if Needed, (Service Kit)23
Wear and Tightness Check of the Manifold Solenoid Valve Pistons24
Wear Check of the Or2-106 4.42X2.62 Nbr O-Ring of the Pressure Sensor Present on the Manifold25
Presence and Wear Check of the Or221226
- Nbr O-Rings of the Oil and Tracer Containers26
Cap. 7 - Calibration27
Clima 8501 Service Kit for Stations with Gas R134A27
Clima Gas R-1234Yf / R-134A Service Kit for Stations with Gas R134A and R1234Yf29
Pressure Calibration (Service Kit)31
Gas Weight Calibration (Service Kit)32
Oil Weight Calibration (Service Kit)33
Cap. 8 - Gas Type Switching34
Gas Type Switching from R134 to R1234Yf34
Cap. 9 - Update44
Software Update44
New Database Purchase and Activation44
Cap. 10 - Equipment and Simulators49
Cap. 11 - Refrigerant Fluid Circuit50
Refrigerant Fluid Circuit50
Operational Cycles52
Receiving Tank58
Manifold Chart59
Suction Unit Chart61
Cap. 12 - Non-Permanent Junctions62
Cap. 13 - Electrical Connections63
Cap. 14 - Spare Parts65
Cap. 15 - Replacement Interventions68
Extraordinary Maintenance List68
Extraordinary Maintenance69
- Replacement of Components Connected to Refrigerant Circuit69
- Replacement of Logic Electronic Board with Display69
- Replacement of Electronic Power Board71
Cap. 16 - Trouble Shooting72
Cap. 17 - Diagnostics74
Failures List74

Related product manuals

BrainBee MultiGas 8500 Plus

77 pages

BrainBee multigas 8500 - CAP. 10 - EQUIPMENT AND SIMULATORS; Required Equipment and Software

Table of Contents

Related product manuals