ENGLISH 6 / 78 CAP. 4 - LAYOUT AND USE OF THE MANUAL
CAP. 4 - LAYOUT AND USE OF THE MANUAL
4.1 USE OF THE MANUAL
The present service manual must be used together with the use and
maintenance manual of the equipment, it must be kept by the
Authorised Assistance Centre or by the Distributor of Brain Bee products
and made available to own assistance staff.
• The content of this manual has been drawn up in compliance with the guide lines of the UNI
standard 10893:2000.
• Diffusion, modification or use of this manual for own aims is forbidden.
• The manual uses symbols which call the reader’s attention to specific points to facilitate its
use.
• It includes all technical, operating, shutdown, maintenance, spare parts and safety
information.
• In case of doubts on the correct interpretation of the instructions, please contact our technical
service to obtain the required clarifications.
Operations which are potentially hazardous for the operator are
highlighted with this symbol.
Such operations can cause serious injury.
Operations requiring special attention are highlighted with this symbol.
Such operations shall be carried out correctly to avoid causing damage
to objects or to the surrounding environment. This symbol also
highlights information to which special attention must be paid.
Operations which require careful reading of the manual’s instructions
are highlighted with this symbol.
4.2 SYMBOLS
This paragraph describes the safety-related symbols that might be present on the external part of the
equipment.
4.2.1 Safety
ALTERNATING CURRENT
SAFETY GROUNDING
CONSULT THE INSTRUCTIONS MANUAL
CAUTION! ELECTROCUTION HAZARD
CAUTION !: DO NOT TRY REMOVING THE COVER
(this operation can be carried out exclusively by qualified technicians)
4.2.2 Marking
CE CONFORMITY MARK
To Next Page
Loading...