BrainBee multigas 8500 - Page 75

ENGLISH 75 / 78 CAP. 17 - DIAGNOSTICS
MULTIGAS 85
00
CODE MESSAGE When it occurs Possible
situations
Actions
W036 FURTHER OIL
INJECTION NOT
POSSIBLE
During oil
injection phase
Insufficient
vacuum level
Increase the vacuum
phase time, check the
A/C system tightness.
W044 VESSEL EMPTY During flushing
or multipass
phase
Gas level is too
low for the
procedure to be
completed
Fill the internal tank with
gas
W045 LP VERY LOW During flushing
phase
LP hose
disconnected,
flushing
couplings not
properly
hooked up or
leak in circuit
being flushed.
Reconnect LP and/or
couplers and search for
and eliminate any leak.
W047 POSSIBLE LEAKAGEDuring the
refrigerant
recovery phase
Vehicle A/C
system (LP side)
may have leaks
--