Controls and Features
Controls and Instruments 13
LEFT HANDLEBAR
1. Headlight high/low beam
The headlight dimmer switch is used to change between the high
and low beams of the headlight. To operate, move the switch
forward for high beam, or back for low beam.
Note: A blue LED on the instrument cluster illuminates whenever the
headlight high beam is on.
2. Headlight high beam flash
The high beam flash is used to alert other motorists. To operate, pull
the momentary switch.
3. Turn signal switch
The turn signal switch is used to signal a turn or a lane change. To
operate, move the switch all the way in the proper direction and
release it. The appropriate turn signal lights will start blinking and an
indicator will flash on the instrument cluster. To cancel the light,
push the switch in.
4. Horn
The horn is used to alert others motorists. To operate, push the horn
button.
Empulse.book Page 13 Thursday, June 27, 2013 11:03 AM
To Next Page
Loading...
