Maintenance
60 Servicing and Maintaining Your Empulse
Refilling the transmission oil
The transmission should be filled with the Empulse standing on level
ground and supported on the kickstand.
1. Fill the transmission with approximately 1.0L (1 quart) of
Synthetic 10W-30 API GL-1 Motorcycle oil (wet clutch approved).
2. Install the oil filler plug and tighten to 15 Nm.
3. Clean the exterior of the transmission to remove any oil deposits.
Disposal of used transmission oil
WARNING
It is illegal to pollute drains, water ways or soil. Only use authorized
waste disposal sites to dispose of used oil and other fluids from the
Empulse.
Empulse.book Page 60 Thursday, June 27, 2013 11:03 AM
To Next Page
Loading...
