Brammo Empulse - Maintenance Schedule

Service and Maintenance Requirements
40 Servicing and Maintaining Your Empulse
Maintenance Schedule
The following table summarizes the types of inspections and servicing recommendations for your Empulse. Both the pre-ride inspection and
the scheduled maintenance at the recommended intervals are necessary to ensure safe and dependable performance. The periodic checks
provide additional confidence in your Empulse’s performance.
Items to Check
Odometer Reading/time Interval (Whichever Occurs Soonest)
Reference
300 mi/500 km
or 1 month
600 mi/1,000 km
or 2 months
3,000 mi/4,800 km
or 6 months
6,000 mi/9,600 km
or 12 months
9,000 mi/14,400 km
or 18 months
12,000 mi/19,300 km
or 24 months
15,000 mi/24,100 km
or 30 months
18,000 mi/28,900 km
or 36 months
Throttle Operation
• Twist throttle to ensure smooth action and
“snap” back to 0% throttle.
√√√√√√√√ Page 52
Drive Chain
• Check chain condition, tension, alignment (*)
• Adjust and lubricate chain
EVERY 300 MILES and after RIDING IN WET AND/OR DIRTY AREAS or
washing the Empulse. Replace if needed.
Page 67
Gear Oil (*)
• Change (warm gearbox before changing)
Optional √√√√√√√ Page 59
Cooling System
• Inspect hoses for cracks and leaks
• Inspect fluid level
√√√√√√√√
• Change coolant (*) √
Empulse.book Page 40 Thursday, June 27, 2013 11:03 AM