EasyManua.ls Logo

Brammo Empulse - Brake Pad Wear and Replacement

Brammo Empulse
112 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Maintenance
Servicing and Maintaining Your Empulse 57
Rear brake fluid reservoir: The fluid level should be above the MIN
mark.
If your inspection indicates a low fluid level, have your Brammo
Authorized Dealer add the recommended brake fluid. Do not add or
replace brake fluid yourself, except in an emergency. If you do add
fluid, have your Brammo Authorized Dealer check the system as
soon as possible.
Brake Pad Wear
Brake pad wear depends upon the severity of usage, the type of
riding, and road conditions. Generally, the pads will wear faster on
wet and dirty roads. Inspect the pads at each regular maintenance
interval.
Always inspect both pads in each brake caliper, and always replace
brake pads as a set.
Minimum brake pad material thickness = 1 mm. Brake pads
should be replaced by your Brammo Authorized Dealer if the
thickness is less than 1 mm.
Empulse.book Page 57 Thursday, June 27, 2013 11:03 AM

Table of Contents

Related product manuals