System Warning and Error Codes
Taking Care of the Unexpected 81
System War ning and Erro r Codes
WARNING AND ERROR MESSAGES
Your Empulse has the ability to detect warning and error conditions. These warnings and errors are designed to alert
you, the rider, that a condition exists that is out of specification.
If a fault is detected, the system attention indicator light will illuminate on the tachometer and a message will be displayed on the LCD
panel.
Most of these warnings and errors will require a Brammo Authorized Dealer to diagnose your Empulse. However, some
issues can be addressed by you, either by correcting the issue or by changing your riding style.
The following is a list of error codes and what they mean.
Code Message Description
A6 SYSTEM FAULT A6 AIM Module Not Communicating
B6 SERVICE REQ'D B6 SYSTEM FAULT B6 BMS Not Communicating
B7 SERVICE REQ'D B7 SYSTEM FAULT B7 Battery Fault: Module Lost
B8 SERVICE REQ'D B8 SYSTEM FAULT B8 Battery Fault: Temperature Sensor Failure
B28 SERVICE REQ'D B28 SYSTEM FAULT B28 Battery Fault: Voltage Sensor Failure
B29 SERVICE REQ'D B29 SYSTEM FAULT B29 Battery Fault: Current Sensor Failure
B30 RECHARGE REQUIRED B30 Battery Fault: Critically discharged alarm
B31 SERVICE REQ'D B31 SYSTEM FAULT B31 Battery Fault: Over Volt alarm
B32 SERVICE REQ'D B32 SYSTEM FAULT B32 Battery Fault: Sanity Error (No communication)
B33 RECHARGE REQUIRED B33 Charge (SOC) is at 0%
B35 ALLOW COOLDOWN B35 Battery Fault: Over Temperature Shutdown
B36 ALLOW COOLDOWN B36 Battery Fault: Over Temperature Alarm
Empulse.book Page 81 Thursday, June 27, 2013 11:03 AM
To Next Page
Loading...
