11 Pipetting (PIP)
86
Operating manual HandyStep® touch, HandyStep® touch S 997486
10.4.2 Alternative access to the learn function
a. Open Options via the button.
b. Swipe the switch to the right.
c. Return to the work menu via the button.
ð
The … symbol indicates that the learn function is active.
10.4.3 Restarting the learn function
If while operating the device you notice that the pause time is too long or too short, you can restart
the learn function. Alternatively, you can also adjust the pause time manually.
10.4.4 Stopping or shortening the learn function
The first time the STEP button is pressed, a 10-second countdown begins. When the countdown ex-
pires, the learn function ends automatically.
• To stop the learn function beforehand, tap on the X button.
• To stop the learn function after you have dispensed liquid by holding the STEP button, tap on the
… button.
• To use the calculated pause time immediately, hold down the STEP button.
10.5 Handling residual volumes
For information on handling residual volumes, see Switching to emptying,p.78 and Aspirating liq-
uid,p.76.
10.6 Options
a. In the operating mode, tap on the symbol .
ð
The Options menu appears.
Option Meaning
Add to Favorites Edits the time between the individual dispensing steps.
Learn pause time Starts the learn function.
Go to Multi-Disp Switches to the Multi-Disp operating mode. The volume set in Auto-
Disp mode is also set in the Multi-Disp operating mode.
Operating Mode Help Shows the help text for the mode.
11 Pipetting (PIP)
For information on the function of this mode, see Overview of modes,p.72. For information on setting
the volume, speed, and other steps found in all modes, see Operation,p.73.
To Next Page
Loading...
