Infusomat® Space 6.0 0 - 5EN
0 - Important Preliminary Remarks
Service Work The present manual is for your information only. The possession of
this manual does not authorize the performance of service work.
Service tasks may only be executed by persons, who
- have received appropriate training on the system from
B. Braun
- are included in the revision service
- possess the necessary test equipment and mechanica
l aids,
and
- fulfill the personal requirements
(training and knowledge).
Technical Safety Checks The user is obliged to perform or to have performed
the Technical
Safety Checks on those medical products for which these checks
have been prescribed by the manufacturer and to carry them out
according to the indications of the manufacturer as well as the
generally approved technical standards while adhering to the pe-
riods stated (§ 6 MP BetreibV).
B. Braun also recommends training on the
Technical Safety
Checks, or to perform at least the steps indicated in the current
version of the manual, as:
- the TSC requires that the instructions in the manuals are ob-
served
- the manuals are a reference for measurements
- depending on the unit type, the Service Program must be
cal
led which may lead to a dangerous unit condition in case
of inappropriate operation. Furthermore, a special service
connector may be necessary.
Current Versions This manual version corresponds to the state when the manual
was writte
n. B Braun reserves the right to make technical modifi-
cations. The state of the revision
is indicated by the index number
in the footer of every page.
To view the current Service Manual, please visit the Service Portal
at:
https://extranet.bbraun.com.
Approval to use the service portal will only be granted after com-
pletion of a technical training course..
Product availability Not all software versions, hardware, or sp
are parts are available in
all regions. Please consult your local B. Braun representative for
availability.
To Next Page
Loading...
Need help?
General
