Braun Infusomat Space - Slide Guide

Disassembly / Assembly
3
Infusomat® Space 6.0 3 - 9EN
3.2 Slide Guide
Designation Order No.
Slide guide ISPS, compl. . . . . . . . . . . . . . . . . . . . . . . . . 3452 1330
Slide guide ISPS, compl. . . . . . . . . . . . . . . . . . . . . . . 3452 1330U
(temperature in Fahrenheit)
Disassembly
1. Remove slide guide (Fig.: 3 - 8 / Item 2) together with the 12
pump slides carefully out of the housing front panel.
Note
The slide guide can be prised out with a pointed object through a
notch
(Fig.: 3 - 8 / Item 1) in the housing front panel on the right
lower side next to the slide guide.
Note
Fig.: 3 - 8 shows as an example the front panel, Outsert ISPS in
Version II with wire bracket. Alternatively, there are devices with
a front panel, Outsert ISPS in Version I with plastic bracket. It is
not necessary to replace the front panel, Outsert ISPS.
Fig.: 3 - 8
Legend of fig. 3 - 8:
Item Designation
1Notch
2 Slide Guide
2
1