Breas Clearway 2 - Page 52

Alarms 52
DOC-001000 Ver 6 Clearway 2 User Manual .
Low Alarm Battery
Item
Description
Definition
Internal alarm battery must be replaced.
Priority
Low
Modes
All
Possible Cause
Alarm battery voltage is low. Connect Clearway
2 to mains to charge battery.
If message persists, contact technical support for
battery replacement.
Clearway 2 action
Treatment is still possible. Power fail alarm may
be low volume or not functioning
. (contact
technical support for battery replacement)
On Screen Message
“Low Alarm battery!
- Connect Mains power and leave to charge
- Contact your supplier if fault persists”
Low Leakage
Item
Description
Definition
Insufficient intentional leak has been detected in
the breathing circuit
Priority
Medium
Modes
NIV
Possible Cause
Intentional leakage port is not fitted.
Incorrect breathing circuit is being used.
Clearway 2 action
Treatment continues. Alarm continues until
condition resolved or treatment ends
On Screen Message
“Low leakage!
Incorrect patient circuit for NIV
- Ensure leak is fitted to the circuit”