Breas Clearway 2 - Page 56

Alarms 56
DOC-001000 Ver 6 Clearway 2 User Manual .
SpO
2
Sensor Disconnected
Item
Description
Definition
SpO
2
sensor has been disconnected
Priority
Low
Modes
All
Possible Cause
SpO
2
sensor has been disconnected either at in-
line connector or at Clearway 2
SpO
2
sensor has failed
Clearway 2 action
Treatment continues
Message must be acknowledged to clear
On Screen Message
“SpO
2
sensor disconnection!
Patient SpO
2
sensor has been disconnected”
Treatment too Long
Item
Description
Definition
Treatment performed is too long to be saved in
TreatRepeat
Priority
Warning
Modes
Manual
Possible Cause
The performed manual treatment is too long to
be saved as a valid treatment in TreatRepeat
Clearway 2 action
Treatment is not saved
On Screen Message
“Treatment too long!
Try recording a shorter treatment”
Treatment has Finished
Item
Description
Definition
Selected treatment has finished
Priority
Warning
Modes
Basic Auto, Program Auto
On Screen Message
“Treatment has Finished!”