Breas Clearway 2 - Page 55

55 Alarms
Clearway 2 User Manual
DOC-001000 Ver 6
Pressure Measurement Fault
Item
Description
Definition
Fault detected in pressure measurement
Priority
Medium
Modes
All
Possible Cause
Internal pressure measurement fault
Clearway 2 action
Treatment stops. The on-screen message must be
acknowledged. Treatment cannot be started until
message has been acknowledged
On Screen Message
“Pressure measurement fault!
Treatment has stopped!
- Restart the Clearway 2
- Contact your supplier if fault persists”
Pressure Sensor Fault
Item
Description
Definition
Mismatch between pressure sensor 1 and 2
Priority
Medium
Modes
All
Possible Cause
Internal Pressure measurement fault
Clearway 2 action
Treatment stops. The on-screen message must be
acknowledged. Treatment cannot be started until
message has been acknowledged
On Screen Message
“Pressure sensor fault!
P1 and P2 Difference -
Treatment has stopped!
- Restart the Clearway 2
- Contact your supplier if fault persists”