24
5. Slide the neck of the Keg into
the bottom of the Keg Caddy.
6. Add Primer and any Hops: Note
take care not to spill any on
the top surface of the keg liner
connector, if you do, carefully wipe
it clean with a clean dry cloth.
7. Add the Filling Cap (with O-Ring in
place) and screw on the Cap Collar.
Be careful not to cross thread.
8. Attach the two connectors to
each end of the Filling Tube.
9. Attach one end to the
BeerDroid Tap and the other
end to the Filling Cap.
To Next Page
Loading...