Classic Cycles Technical Resources
25
13. Reconnect the wiring between the AC
generator, key switch, and rectifier. All
connections are made color to color.
14. Reinstall the saddle.
15. Reinstall the air cleaner assembly.
16. Reinstall the left rubber carburetor cap and
reinstall the ducts leading from the air cleaner
to the carburetor caps.
17. Reinstall the right hand carburetor and
carburetor cover, using a new gasket.
18. Before operating the cycle, perform the
following operations:
A. Ignition timing
B. Fill transmission with 25 ounces of SAE10W30
motor oil.
C. Put one gallon of premixed fuel in the ratio of
20 parts of gasoline to one part of oil into the
fuel tank. This mixture will lubricate the
engine while the oil pump primes the oil lines.
As soon as heavy exhaust is seen coming from
the mufflers, the tank may be filled with
regular gasoline.
D. Be certain that the oil supply tank is filled
with Bridgestone 2-cycle oil.
CYLINDERS AND PISTONS:
A. Construction and Operation:
To Next Page
Loading...
