EasyManua.ls Logo

Bridgestone 90 - 175 Dual Twin Specifications

Default Icon
92 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Classic Cycles Technical Resources
5
SPECIFICATIONS 175 Dual Twin
*Engine
(1) Type : 2-stroke, Dual Cylinders
(2) Piston Displacement: 177 cc. (10.8 cu-inch)
(3) Bore & Stroke: 50 mm × 45 mm (1.97 × 1.77 inch)
(4) Compression Ratio: 9.5: 1
(5) Max. Brake Horsepower: 20HP/8,000 rpm
(6) Max. Torque : 1.9 kg-m/7, 500 rpm
(7) Air Intake System : Rotary disc valve
(8) Starting System : Kick Starter
(9) Charging System : A. C. Generator
(10) Ignition System : Battery
(11) Ignition Timing: (21 +1,-2) degrees before T.D.C.
(12) Spark Plugs : N G K B-8 H
(13) Carburetors : AMAL Type. VM 17 SC
(14) Engine Lubrication : 2 cycle engine motor oil
(15) Fuel: Gasoline
(16) Transmission oil : 0.8 litre (0.21 US gal.) in transmission case
SAE No. 10W/30 in all seasons or
SAE No. 30 in summer and SAE No. 20 in winter
*Performance
(1) Max. Speed: Over 130km/h(80 mph)
(2) Climbing Gradient: 1 in 3
(3) Fuel Consumption: 55 km/l (129 mpg) at 40 km/h (25 mph) on paved flat test road.
(4) Min. Turning Radius : 1.95 m (76. 8 inch)
(5) Acceleration:
(Standing Start 1/4 mile) Under 18 sec (0-400 m)
(6) Braking Distance : Less than 6 m at 35 km/h (20 feet, at 22 mph).
*Frame & Suspension
(1) Frame Type : Pipe Frame, Cradle Type
(2) Front Suspension : Telescopic Fork with Hydraulic Damper
(3) Rear Suspension : Swinging Arm with Hydraulic Damper

Table of Contents

Related product manuals