FT800 Series Programmer Guide
Version 2.1
Document Reference No.: BRT_000030 Clearance No.: BRT#037
10
Product Page
Document Feedback Copyright © Bridgetek Limited
cmd_*() – Write 32 bits co-processor engine command with its necessary parameters to
the co-processor engine FIFO (RAM_CMD).
dl() – Write the specified 32 bits display list command to RAM_DL. Refer to section 2.5.4
Writing display lists for more information.
host_command() – send host command to FT800. Refer to the FT800 data sheet for
more information.
To Next Page
Loading...