Bridgetek FT801 - Macro

FT800 Series Programmer Guide
Version 2.1
Document Reference No.: BRT_000030 Clearance No.: BRT#037
127
Product Page
Document Feedback Copyright © Bridgetek Limited
4.31 MACRO
Execute a single command from a macro register.
Encoding
31 24
23 1
0
0x25
Reserved
m
Parameters
m
Macro register to read. Value 0 means the FT800 will fetch the command
from REG_MACRO_0 to execute. Value 1 means the FT800 will fetch the
command from REG_MACRO_1 to execute. The content of REG_MACRO_0 or
REG_MACRO_1 shall be a valid display list command, otherwise the behavior
is undefined.
Graphics context
None
See also
None