FT800 Series Programmer Guide
Version 2.1
Document Reference No.: BRT_000030 Clearance No.: BRT#037
84
Product Page
Document Feedback Copyright © Bridgetek Limited
COLOR_A set the current color alpha
COLOR_MASK enable or disable writing of color components
COLOR_RGB set the current color red, green and blue
LINE_WIDTH set the line width
POINT_SIZE set point size
RESTORE_CONTEXT restore the current graphics context from the context stack
SAVE_CONTEXT push the current graphics context on the context stack
SCISSOR_SIZE set the size of the scissor clip rectangle
SCISSOR_XY set the top left corner of the scissor clip rectangle
STENCIL_FUNC set function and reference value for stencil testing
STENCIL_MASK control the writing of individual bits in the stencil planes
STENCIL_OP set stencil test actions
TAG set the current tag value
TAG_MASK control the writing of the tag buffer
4.3.2 Drawing actions
BEGIN start drawing a graphics primitive
END finish drawing a graphics primitive
VERTEX2F supply a vertex with fractional coordinates
VERTEX2II supply a vertex with positive integer coordinates
4.3.3 Execution control
JUMP execute commands at another location in the display list
MACRO execute a single command from a macro register
CALL execute a sequence of commands at another location in the
display list
RETURN return from a previous CALL command
DISPLAY end the display list
To Next Page
Loading...