Bridgetek FT801 - Clear_Tag

FT800 Series Programmer Guide
Version 2.1
Document Reference No.: BRT_000030 Clearance No.: BRT#037
118
Product Page
Document Feedback Copyright © Bridgetek Limited
4.23 CLEAR_TAG
Specify clear value for the tag buffer
Encoding
31 24
23 8
7 0
0x12
Reserved
t
Parameters
t
Value used when the tag buffer is cleared. The initial value is 0.
Graphics context
The value of s is part of the graphics context, as described in section 4.1
See also
TAG, TAG_MASK, CLEAR