FT800 Series Programmer Guide
Version 2.1
Document Reference No.: BRT_000030 Clearance No.: BRT#037
137
Product Page
Document Feedback Copyright © Bridgetek Limited
4.39 STENCIL_MASK
Control the writing of individual bits in the stencil planes
Encoding
Parameters
mask
The mask used to enable writing stencil bits. The initial value is 255
Graphics context
The value of mask is part of the graphics context, as described in section 4.1
See also
STENCIL_FUNC, STENCIL_OP, TAG_MASK
To Next Page
Loading...