Bridgetek FT801 - CMD_CLOCK - draw an analog clock

FT800 Series Programmer Guide
Version 2.1
Document Reference No.: BRT_000030 Clearance No.: BRT#037
173
Product Page
Document Feedback Copyright © Bridgetek Limited
5.26 CMD_CLOCK - draw an analog clock
C prototype
void cmd_clock( int16_t x,
int16_t y,
int16_t r,
uint16_t options,
uint16_t h,
uint16_t m,
uint16_t s,
uint16_t ms );
Parameters
x
x-coordinate of clock center, in pixels
y
y-coordinate of clock center, in pixels
options
By default the clock dial is drawn with a 3D effect and the name of this option
is OPT_3D. Option OPT_FLAT removes the 3D effect. With option
OPT_NOBACK, the background is not drawn. With option OPT_NOTICKS, the
twelve hour ticks are not drawn. With option OPT_NOSECS, the seconds hand
is not drawn. With option OPT_NOHANDS, no hands are drawn. With option
OPT_NOHM, no hour and minutes hands are drawn.
h
hours
m
minutes
s