Bridgetek FT801 - Page 165

FT800 Series Programmer Guide
Version 2.1
Document Reference No.: BRT_000030 Clearance No.: BRT#037
165
Product Page
Document Feedback Copyright © Bridgetek Limited
Examples
To load a JPEG image at address 0 then draw the bitmap at (10,20) and (100,20):
cmd_loadimage(0, 0);
... // JPEG file data follows
cmd(BEGIN(BITMAPS))
cmd(VERTEX2II(10, 20, 0, 0)); // draw bitmap at (10,20)
cmd(VERTEX2II(100, 20, 0, 0)); // draw bitmap at (100,20)