FT800 Series Programmer Guide
Version 2.1
Document Reference No.: BRT_000030 Clearance No.: BRT#037
195
Product Page
Document Feedback Copyright © Bridgetek Limited
specified, that key is drawn 'pressed' - i.e. in background color with any 3D
effect removed.
w
The width of the keys
h
The height of the keys
s
key labels, one character per key. The TAG value is set to the ASCII value of
each key, so that key presses can be detected using the REG_TOUCH_TAG
register.
Description
The details of physical dimension are
The gap between keys is 3 pixels
For OPT_CENTERX case, the keys are (font width + 1.5) pixels wide
,otherwise keys are sized to fill available width
Refer to Co-processor engine widgets physical dimensions for more information.
Command layout
To Next Page
Loading...