FT800 Series Programmer Guide
Version 2.1
Document Reference No.: BRT_000030 Clearance No.: BRT#037
249
Product Page
Document Feedback Copyright © Bridgetek Limited
Register Definition 79 REG_CTOUCH_TOUCH1_XY Definition
31 16 15 0
Reset Value: 0x80008000
Note: This register is only applicable in the extended mode
REG_CTOUCH_TOUCH1_XY Definition
Bit 0 - 15 : The value of these bits are the Y coordinates of the second touch point.
Bit 16 - 31: The value of these bits are X coordinates of the second touch point.
Register Definition 80 REG_CTOUCH_TOUCH2_XY Definition
Note: This register is only applicable in the extended mode
REG_CTOUCH_TOUCH2_XY Definition
Bit 0 - 15 : The value of these bits are the Y coordinates of the third touch point.
Bit 16 - 31: The value of these bits are X coordinates of the third touch point.
To Next Page
Loading...