Brooks LF80C - Page 103

Brooks Automation
278580 Revision A 91
LF80C ZeniD RFID Reader 7 Operation
Product Manual 7.3 Operation of SECS Protocol
Description Provides status information of a subsystem component.
Consists of PM Information and the current values of the
CIDRW attributes AlarmStatus, OperatingStatus, and
HeadStatus.
List of a Status
L,4
<PMInformation>
<AlarmStatus>
<OperatingStatus>
<HeadStatus>
For data items OperatingStatus and HeadStatus, see data item ATTRVAL.
Where used S18F2, S18F4, S18F8, S18F10, S18F12, S18F14
Description Identifies where a request for action or data is
to be applied. Alternatively, you can use the HeadID.
See also reader parameter definitions (data
item ECV) parameter 7, 8 and 12.
The 4 ASCII character TARGETID is changeable (only
changeable for LF80C devices), and defined in
parameter 7
and 8 ("ECID_07", "ECICD_08").
The 2 ASCII character HeadID is changeable,
and defined in parameter 12 ('ECID_12').
Where used S18F1, S18F3, S18F5, S18F7, S18F9, S18F11, S18F13
STATUS Format: A[2]
TARGETID
Format: A[max
4]