Brooks LF80C - Page 105

Brooks Automation
278580 Revision A 93
LF80C ZeniD RFID Reader 7 Operation
Product Manual 7.3 Operation of SECS Protocol
Parameter 0 (0x00) Gateway ID
The gateway ID is a part of the device ID. The BROOKS SECS-I reader
works simultaneously as a gateway and as a reader (CIDRW with integrated
head).
It is the "lower message ID" in the message header.
00 .. 255
Default: Last two characters of hex serial number
The default gateway ID corresponds to parameter 8 (TARGETID low byte).
For more details see
Î
Parameter 8 (0x08).
36 0x24
Î
Lock membrane keyboard
37 0x25
Î
MID area
38 0x26
Î
Test after software reset
39 0x27
Î
Transmitter level (write mode)
40 0x28
Î
Transponder load duration (write
mode)
41 0x29
Î
Delay time between read cycles
42 0x2A
Î
CarrierIDOffset
43 0x3B
Î
CarrierIDLength
44 0x2C
Î
FixedMID
45 0x2D
Î
MIDFormat
99 0x63
Î
Customer code
123 0x7B
Î
Fine version
No. (dec) No. (hex) Parameter name