Brooks LF80C - Page 125

Brooks Automation
278580 Revision A 113
LF80C ZeniD RFID Reader 7 Operation
Product Manual 7.3 Operation of SECS Protocol
S3F13: RETURN READ MID (reader -> host, reply)
The reader sends the ID of the cassette at the I/O port to the host.
S3F13 W
<L[2]
<B[1] PTN>
<B[9] PAGEDATA >
>.
S3F14: MID ACKNOWLEDGE (host -> reader)
The host acknowledges the received data.
S3F14
<B[1] MIDAC>.
S3F65: WRITE MID AT I/O PORT (host -> reader, reply)
The host requests that the reader write the PAGEDATA.
S3F65 W
<B[9] PAGEDATA >
S3F66: WRITE ACKNOWLEDGE (reader -> host)
The reader only acknowledges the receipt of the write command.
The write acknowledge is sent later.
S3F66
<L[2]
<B[1] MIDRA>
<B[9] PAGEDATA >
>.
S3F67: RETURN WRITE SUCCESS (reader -> host, reply)
The reader reports the successful writing of the transponder. The reader
sends information about the presence sensor.
S3F67 W
<B[1] PTN>.
S3F68: WRITE SUCCESS ACKNOWLEDGE (host -> reader)
The host acknowledges the received data.
S3F68
<B[1] MIDAC>.