Brooks LF80C - Page 126

Brooks Automation
114 278580 Revision A
7 Operation LF80C ZeniD RFID Reader
7.3 Operation of SECS Protocol Product Manual
S3F73: LOCK MID AT I/O PORT (host -> reader, reply)
The host requests the reader to lock the requested page.
S3F73 W
<B[1] PAGE_ID>.
S3F74: LOCK ACKNOWLEDGE (reader -> host)
The reader acknowledges the receipt of the locking command only.
The locking acknowledgment is sent later.
S3F74
<L[2]
<B[1] MIDRA>
<B[9] PAGEDATA >
>.
S3F75: RETURN LOCK SUCCESS (reader -> host, reply)
The reader reports the successful locking of the given page. The reader
sends information about the presence sensor.
S3F75 W
<B[1] PTN>.
S3F76: LOCK SUCCESS ACKNOWLEDGE (host -> reader)
The host acknowledges the receipt of the lock success message (S3F75).
S3F76
<B[1] MIDAC>.
ATTENTION
Locking a transponder page is permanent.
You cannot unlock a transponder page.