Brooks LF80C - Page 147

Brooks Automation
278580 Revision A 135
LF80C ZeniD RFID Reader 7 Operation
Product Manual 7.3 Operation of SECS Protocol
Host reads material ID of a multipage transponder with S18F9
Host to Reader: S18F9
14:31:32 Outgoing: ENQ ( 05 )
14:31:32 Incoming: EOT ( 04 )
14:31:32 Outgoing: Length Byte ( 10 )
14:31:32 Outgoing: Header ( 01 FF 92 09 80 01 00 00 00 2D )
14:31:32 Outgoing: Data
41 04 31 32 33 34 → TARGETID "1234"
14:31:32 Outgoing: Checksum ( 58 02 )
14:31:32 Incoming: ACK ( 06 )
Reader to Host: S18F10
14:31:32 Incoming: ENQ ( 05 )
14:31:32 Outgoing: EOT ( 04 )
14:31:32 Incoming: Length Byte ( 37 )
14:31:32 Incoming: Header ( 81 FF 12 0A 80 01 00 00 00 2D )
14:31:32 Incoming: Data
01 04
41 04 31 32 33 34 → TARGETID "1234"
41 02 4E 4F → SSACK "NO"
41 08 4E 72 2E 30 30 31 32 33 → MID "Nr.00123"
01 01
01 04 → STATUS <L4>
41 02 4E 45 → PMInformation "NE"
41 01 30 → Alarmstatus "0"
41 04 49 44 4C 45 → OperationalStatus "IDLE"
41 04 49 44 4C 45 → HeadStatus "IDLE"
14:31:32 Incoming: Checksum ( 0A 80 )
14:31:32 Outgoing: ACK ( 06 )
The host wants to read the material ID of any transponder. The reader
confirms the success of the read command with SSACK "NO" and returns
the material ID "No.00123" (see
Î
Data items).