Brooks LF80C - Page 90

Brooks Automation
78 278580 Revision A
7 Operation LF80C ZeniD RFID Reader
7.3 Operation of SECS Protocol Product Manual
Data item dictionary This section defines the data items used in the standard SECS-II messages
described in
Î
Message Details.
Syntax:
Acknowledge code
0 : Sensor 0 was the initiator
>0 : Error, not accepted
Where used S3F6, S3F8
Acknowledge code
0 : No error
>0 : Error, not accepted
Where used S5F2
Name A unique name for this data item. This name is used in
the message definitions.
Format The permitted item format code which can be used for
this standard data item.
Item format codes are shown in hex and octal, as
described in the chapter
Î
Data items.
The notification "3()" indicates any of the signed integer
formats (30, 31, 32, 34).
Description A description of the data item, with the meanings of
specific values.
Where used The standard messages in which the data item appears.
ACKC3 Format: B[1]
ACKC5 Format: B[1]