What to do if Brooks Polycold MaxCool 2500L Chiller has a power failure and the Fault LED is amber?
If your Brooks Chiller experiences a power failure and the Fault LED is amber, the control voltage may be outside acceptable limits. Verify the transformer tap settings to ensure they match your supply voltage. Also, check the supply voltage for deviations beyond the allowable voltage range for the current tap setting.
Explains industry standard hazard alerts, including Safety Text, Safety Icons, and Signal Words.
Provides guidelines on unauthorized service, proper operation, and seismic restraint.
Explains safety and operational interlocks protecting personnel and the cryochiller.
Details electrical hazards including installation and contact with energized equipment.
Details environmental requirements for installation, including location and room conditions.
A checklist of procedures to follow for installing the Polycold Cryochiller.
Instructions for connecting the cooling water supply and drain lines to the unit.
Instructions for connecting electrical power, emphasizing qualified personnel and local codes.
Provides guidelines for routing, installing, and connecting refrigerant lines.
Procedures for powering up the cryochiller, testing components, and verifying initial operation.
Final operational checks including compressor oil level and water flow verification.
Lists hardware and software interlocks that affect compressor operation.
Steps for system boot-up, compressor startup, and alternate startup procedures.
Guides on gathering information and asking questions to define and solve system problems.
To Next Page
General